Supplier Spotlight

Video Exclusives

Plasma wind tunnel testing

Watch the first simulated re-entry of a full-sized spacecraft in a plasma wind tunnel as the The Scirocco facility tests the Qarman cubesat.

Click here to watch video

18 July, 2018

Sonic boom acoustic tests

This video, from a NASA Social event at Armstrong Flight Research Center, shows an F/A-18 producing a regular sonic boom at 0:43 and and then a low “boom” by performing the dive maneuver at 02:34. NASA researchers are preparing for public tests of technology designed to reduce the noise of sonic booms

Click here to watch video

03 July, 2018

Autonomous vehicles explained

Safran’s SimplyFly! light hearted series of video’s takes on autonomous vehicles - how will they work and what are the main challenges? Learn more about the topic by watching this video.

Click here to watch video

20 June, 2018


To watch more videos, click here

With Airbus' Zephyr drone pushing the limits of aviation to reach an altitude of 74,000ft in the stratosphere during test flights, we would like to ask - where do you think the atmosphere ends and space begins?


Tougher telemetry technology developed to study boundary layer transition in projectiles

The casing for the telemetry package that will be used to transmit data when launching projectiles (Image: US Air Force photos/Deidre Ortiz)


Engineers from the USA are developing a telemetry capability that will gather, transmit and record data for projectiles traveling at speeds of more than 13,000mph and experiencing more than 25,000g.


The telemetry technology is being developed at the US Air Force’s Arnold Engineering Development Complex (AEDC) in Tennessee by its Space and Missiles Combined Test Force, so that boundary layer transition (BLT) can be studied in projectiles.


Projectiles experience BLT, the transition from laminar to turbulent flow, when traveling at very high speeds. The specific location along the projectile body where BLT occurs is a critical parameter that effects the flight dynamics of the projectile.


Elvis Encalada, electrical engineer at the AEDC, said, “The main idea is to have the instrumentation and electronics inside the launched projectile. The electronics will collect the BLT data and wirelessly transmit it. Reception antennas will be placed along the range and used to collect the transmitted data which then goes to an RF receiver, and ultimately, a computer.


“The projectile has multiple components and is made of multiple materials,” Encalada said. “It had to accommodate a standalone electronics package, an antenna with a detachable radome made out of a material that had not been used in Range G before, and multiple integrated sensors – all in such a way that it can withstand the extreme pressures of the light gas in the barrel and g-forces upon acceleration and still function and fly.”


The project has also involved a team from the US Army’s Research Lab, which led the development of the design for the transmitting antenna and the telemetry electronics and assisted in the process of properly integrating the electronics and mechanical bodies.


“The AEDC electronics collects instrumentation data and passes the digital data on to the telemetry electronics and transmitting antenna. The projectile body was designed to enclose all of the electronics and the instruments used,” Encalada said.


The electronics and the housing were integrated and tested at the Aberdeen Proving Grounds and Adelphi Laboratory Center (ALC) in Maryland.


Encalada said, “Without proper potting, the electronics or crucial connection points would be damaged or crushed under its own weight when experiencing high g-forces.


“The ALC has an air gun facility which operates similar to Range G, except on a much smaller scale and shorter time periods,” Encalada said. “Using the air gun, we were able to determine that the electronics can survive up to 23,000Gs.”


Testing of the telemetry package in Range G at Arnold is anticipated to take place sometime next year.


“We hope that the end result will be that AEDC test customers will receive critical data about boundary layer transition during hypersonic flight and hypervelocity impacts that were previously unable to be measured,” Encalada added.


July 6, 2018


Written by Ben Sampson


Your email address:

Read Latest Issue

Read Latest Issue

Web Exclusives

Customers appreciate the Global 6000’s smooth ride, but it wasn’t until Bombardier conducted a series of innovative tests that there was quantifiable data to support their claims
Click here to read more

Marine Dumont, business development manager, Kistler Instruments outlines how innovation in dynamometers is enabling clearer images of Earth from satellites 
Click here to read more

Steve Drake, NDT market manager for Ashtead Technologies, describes how the rapid deployment of the latest borescope equipment to Africa helped a business aviation operator make tough decisions about a grounded aircraft 
Click here to read more

Hardware-in-the-loop systems have helped to reduce flight testing of Saab's latest fighter jet, writes National Instruments in this case study
Click here to read more

An experiment is set to be launched from the International Space Station this month which turns the normal approach to space on its head – instead of putting things into space, this experiment aims to test ways to take things out of space. 
Click here to read more

Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the aerospace testing industry. Want to see your company included? Contact for more details.

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the aerospace testing community? Good or bad, we'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email