Supplier Spotlight

Video Exclusives

Sandia conducts alternative pyroshock testing

A 100lb solid steel projectile, fired from Sandia National Laboratories’ 6in gas gun, impacts material on a resonant bar attached to a test article. The impact initiates a wave that travels through the resonant bar assembly into the test article, simulating a stage separation pyroshock event.

Click here to watch video

06 September, 2017



Flying Test Bed farewell

As GE's original B747 flying testbed heads for retirement, hear from the pilots who flew the aircraft for more than 25 years with 39 different engine builds.

Click here to watch video

21 August, 2017


 

To watch more videos, click here

Do you see a strong industry demand for more flight test pilots and flight test engineers to work in the ever-growing civil aviation sector? And if so, are the skills required any different from those needed for the defense sector?

Supplier Spotlight

« back to listing

North Star Imaging

Email: rbuencamino@4nsi.com
Web: https://goo.gl/TfxNZ6
Tel: +1 763.463.5650 x381

 

 

NSI has over 30 years of experience manufacturing digital industrial 2D X-ray and 3D computed tomography (CT) systems and software solutions for testing and evaluating products and materials for quality inspection.

Typical inspection services include internal measurements, 3D CAD comparisons, void and/or porosity analysis, surface reconstructions for reverse engineering, finite element analysis and failure analysis.

NSI was acquired by ITW in 2010 and has since gained even more strength and doubled the size of its facility in Minnesota (USA) and added other sites – in Paris (France) in 2012, UK and California (USA) in 2015 and in 2016 in Suzhou (China).
 

Building world class industrial digital X-ray & Computed Tomography Systems

NSI offers eight (8) standard X-ray and CT/micro CT systems including the just released X3000 which has a small footprint but has the capabilities of larger X-ray systems.

 


Released in 2017

The new X3000 system. Capabilities include:

  • Geometric Magnification of >2000x
  • Overall maximum system resolution of <500 nm
  • X-ray source voltage range of 10Kv to 225 kV
  • Nominal part envelope of 19.5 in. (50 cm) x 24 in. (61 cm)

NSI’s new precision robotiX technology for high speed automatic part loading and unloading. Autonomous operation allows for reduced cycle time and increases productivity. robotiX can be combined with the X25, X50, X3000, X5000 and X7000.

 

 

 

NSI’s Imaging Capabilities for the Aerospace Industry – unbelievable imagery for quality inspection

NSI’s Imaging Capabilities for the Aerospace Industry – unbelievable imagery for quality inspection
Computed Tomography, unlike conventional X-ray, takes cross section images and provides a three-dimensional image of the inside and outside of a part or component.

 

A 3D view of a turbine blade.

An Electrical Connector.

Image of a tube weld


Other Value Added services

  • Inspection Services Group (ISG) offering need based consulting for anyone needing X-ray and/or computed tomography scanning of single or multiple parts of all sizes.
  • Technical Service & Support team that is on call 24/7 to address immediate global customer service needs.
  • Basic & Advanced Digital Radiography (DR) and Computed Tomography (CT) Classes all year-round.



NDT (Non-Destructive Training) Classes are conducted in Rogers, Minnesota, USA. Customer on-site training courses are also available upon request.


Contact NSI to schedule your demonstration


The corporate office is in the city of Rogers, just outside Minneapolis, Minnesota. This facility has approximately 90 highly skilled employees including application specialists, mechanical engineers, software engineers, programmers, level 3 instructors and others.


NSI is an ISO 9001:2008 certified company.
 

North Star Imaging - Corporate Office
19875 S. Diamond Lake Road
Rogers, MN 55374
Tel: +1- 763-463-6377

Visit www.4nsi.com to learn more about NSI’s products and services or schedule a demo meeting with our sales teams:

In Minnesota:
Technical System Sales
Phone: +1 763-312-8836
sales@4nsi.com

Inspection Services:
Phone: +1 763-317-9873
scanning@4nsi.com

In California:
Phone: +1 949-346-1299
Scanning.ca@4nsi.com

In France:
Phone: +33 (0) 1 48 17 02 00
Sales.eu@4nsi.com

In the UK:
Phone: +44 7557 034195
Sales.uk@4nsi.com

In China:
Phone: + 86 18516 332 893
Sales.cn@4nsi.com
 

Read Latest Issue

Read Latest Issue

Web Exclusives

Two leading test pilot schools continue to invest in aircraft, equipment and new approaches to better meet the changing needs of industry 
Click here to read more

What role will wind tunnels play in the testing of future aircraft? NASA’s latest supersonic testing program provides some clues
Click here to read more

How are ejector seats tested – and where do humans fit in?
Click here to read more

NASA recently ran the first-ever test of a new jet engine technology that could radically increase fuel efficiency  
Click here to read more

A series of C-17 flight tests have helped quantify the drag reduction and corresponding fuel savings afforded by temporary aerodynamic finlets and microvanes
Click here to read more


Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the aerospace testing industry. Want to see your company included? Contact tom.eames@ukimediaevents.com for more details.

فروشگاه اینترنتی فروشگاه اینترنتی سیستم همکاری در فروش کانال تلگرام چت روم ماهواره آنلاین اندروید دانلود فیلم فروشگظ;ه اینترنتی

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the aerospace testing community? Good or bad, we'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to anthony.james@ukimediaevents.com

Submit Your Recruitment Ad

Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email michael.jones@ukimediaevents.com